• 首頁
• 考題分類
• 如何購買

HP ProCurve Routing Switch Essentials v5.21

HP ASE HP0-790考試題庫由KillTest認證題庫網資深IT認證講師和HP ASE產品專家結合PROMETRIC或VUE的真實HP0-790考試環境最新原題傾心打造。

題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對HP ASE HP0-790(HP ProCurve Routing Switch Essentials v5.21)考試原題完整覆蓋。HP0-790題庫助您輕鬆通過認證考試，一次不過全額退款。

HP ASE HP0-790(HP ProCurve Routing Switch Essentials v5.21)考題由我們的資深IT認證講師和HP ASE產品專家精心打造，包括了當前最新的真實HP0-790考題，全部附有正確答案。

所有購買KillTest HP0-790 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過HP ASE HP0-790考試。

1、本題庫源自合作考試中心的真實考試原題，截屏后由我們的專業團隊匯總整理，再經過合作培訓中心資深IT認證講師對考題校對，保證了認證考試題庫的專業品質，題庫試題正確率100%，對HP0-790認證考試考題覆蓋率96％以上。您只需在參加HP ASE HP0-790認證前整體學習下本題庫，必定可以輕鬆完成考試，一次通過認證。

2、KillTest 實行“一次不過全額退款”承諾。如果您購買了我們的《HP0-790 Exam》考題，只要不是首次通過，憑蓋有PROMETRIC或VUE考試中心鋼印的考試成績單，我們將退還您購買HP0-790題庫的全部費用，絕對保證您的利益不受到任何的損失。(全額退款詳情)

3、作為亞太地區最專業的IT認證試題題庫供應商，我們提供完善的售後服務，我們對所有購買題庫的客戶提供跟蹤服務，在您購買考題后的60天內，享受免費升級考題服務，如果在這期間，認證考試中心對HP0-790考題做出修改或變題，我們會在第一時間更新相關題庫，并免費提供給您更新下載。

HP ProCurve Routing Switch Essentials v5.21(HP0-790 Exam)屬於HP ASE認證考試中的一門，如果需要取得HP ASE證書，您可能還需要參加其他相關考試，詳情可訪問HP ASE認證專題，在那裡，你將看到所有HP ASE認證相關考試科目。

HP0-790:下载HP0-790考试题库演示部分（PDF格式）

HP0-790题库部分演示（DEMO）

1.The global context in the running configuration of a ProCurve Routing Switch 9300m includes the spanning-tree single 802-1w command. However, each of the VLAN contexts includes the spanning-tree command. How will the switch implement Spanning Tree?
A.The switch will implement the Spanning Tree version included in BPDUs it receives from neighbors.
B.The switch will implement a single instance of IEEE 802.1w.
C.The switch will not join a Spanning Tree because of the mismatch between configured versions.
D.The switch will implement per-VLAN IEEE 802.1D and ignore the global configuration command.
Correct:B
2.The administrator of a ProCurve Routing Switch 9300m enters spanning-tree in the global configuration context. Which Spanning Tree topology is enabled on the switch?
A.Single-instance Spanning Tree
B.Rapid Spanning Tree
C.Extended Spanning Tree
D.Per-VLAN Spanning Tree
Correct:D
3.You must set 802.1w Bridge Priorities for a ProCurve Routing Switch 9300m and a Switch 5300xl. What is a difference between the Bridge Priority settings on these two models?
A.On the 9300m, the Bridge Priority is set at actual value. The 5300xl uses a multiplier.
B.The 9300m supports 4096 Bridge Priority values. The 5300xl supports 16.
C.On the 5300xl, 0 is the lowest Bridge Priority. On the 9300m, 0 is the normal priority.
D.The 5300xl supports a separate Bridge Priority for each STP instance. On the 9300m, a single priority is applied to all STP instances.
Correct:A
4.A customer network includes a ProCurve Routing Switch 9300m and several 5300xl switches. If the 5300s are configured at default, which protocol must be enabled on the 9300m in order for all the switches to participate in a single Spanning Tree domain?
A.IEEE 802.1X
B.IEEE 802.1Q
C.IEEE 802.1s
D.IEEE 802.1w
Correct:D
5.What is the size of the address range specified in the following ACL entry? Access-list 1 permit 192.168.192.0 0.0.1.255?
A.256 addresses
B.512 addresses
C.1,024 addresses
D.65,536 addresses
E.16,777,216 addresses
Correct:B
6.Why are extended ACLs more appropriate for traffic-filtering applications than standard ACLs?
A.Extended ACLs use simpler syntax.
B.Extended ACLs use bandwidth more efficiently.
C.Extended ACLs support more matching criteria.
D.Extended ACLs are easier to deploy on multiple switches.
Correct:C
7.What is a valid application for ACLs on the ProCurve Routing Switch 9300m?
A.balancing traffic across redundant links
B.defining address pools to be used in NAT
C.summarizing routes learned through OSPF
D.choosing between equal-cost paths in the IP route table
Correct:B
8.What is the effect of the following ACL when it is applied inbound to a router interface? Access-list 101 permit tcp any any eq telnet
A.The router will allow all Telnet traffic sent through this interface. Other traffic will be denied.
B.The router will allow all Telnet traffic received through this interface. Other traffic will be denied.
C.The router will deny all Telnet traffic sent through this interface. All other traffic will be permitted.
D.The router will allow all Telnet traffic sent or received on this interface. Other traffic will be denied.
Correct:B
9.On the ProCurve Routing Switch 9300m, which step is necessary to enable the logging of system events related to ACL matching?
A.Enable ACL logging in the global configuration context.
B.Enable ACL logging in the configuration context for a named ACL.
C.Use the log parameter in the statement that creates an ACL entry.
D.Use the log parameter in the statement that binds an ACL to an interface.
Correct:C
10.How can you apply four ACL entries to a single interface on a 9300m?
A.Assign the same ACL ID to each of the four entries and use a single statement to associate the common ACL ID with the interface.
B.Assign a unique ACL ID to each of the four entries and use a single command to associate the four IDs with the interface.
C.Assign a unique ACL ID to each of the four entries and use a separate statement to associate each ACL ID with the interface.
D.Each interface can support only one inbound ACL entry and one outbound ACL entry.
Correct:A
11.On the ProCurve Routing Switch 9300m, what is a difference between hardware-based ACLs and flow-based ACLs?
A.Hardware-based ACLs must be extended ACLs. Flow-based ACLs can be extended or standard.
B.Hardware-based ACLs use the route table in the management module to perform lookups. Flow-based ACLs use the interface module's session table.
C.Packets subject to flow-based ACLs are compared with session table entries. Packets subject to hardware-based ACLs are compared with CAM entries.
D.The application of hardware-based ACLs results in static CAM entries. CAM entries for flow-based ACLs are created as needed and aged out when not needed.
Correct:D
12.Which step is necessary to enable administrators to use the web interface to make configuration changes on a ProCurve Routing Switch 9300m?
A.Configure local user accounts.
B.Assign a password to the system-defined super user.
C.Configure SNMP management workstations at the CLI.
D.Define a read/write SNMP community.
Correct:D
13.You must configure a ProCurve Routing Switch 9300m that has two management modules and is set to factory defaults. You will use a direct serial connection to perform the initial configuration. To which management module should you connect?
A.The module with the Active LED lit.
B.The module in the highest numbered slot.
C.Either management module can be used.
D.The module with the lowest MAC address.
Correct:A
14.How are changes to the running configuration of a ProCurve Routing Switch 9300m retained?
A.immediately written to dynamic memory
B.written to dynamic memory when the administrator issues the write memory command
C.immediately written to flash memory
D.written to non-volatile memory when the switch is restarted
Correct:A
15.You must issue the dual-mode command for port 1 in slot 4 on a ProCurve Routing Switch 9304m provisioned with two eight-port management modules and two 16-port 100/1000 modules. Which command will place you in the correct context?
A.9304m(config)#int e 4/1
B.9304m(config)#int e d1
C.9304m(config)#int e 33
D.9304m(config)#int e 1/4
Correct:A
16.You must copy the configurations of a ProCurve Switch 5300xl and a Routing Switch 9300m to a TFTP server. What is the difference between the processes for performing this task on the two switch models?
A.The 5300xl allows you to enter the copy command from a configuration context. The 9300m requires you to enter the Privileged EXEC level.
B.The 5300xl uses the copy command for this task. The 9300m uses a specialized backup command.
C.The 5300xl requires you to exit all configuration contexts before entering the copy command. The 9300m allows you to enter the command in any context.
D.The 5300xl requires you to enter the Manager context before issuing the copy command. The 9300m requires you to enter the global configuration context.
Correct:A
17.An administrator issues the reload command after copying a new system image from a TFTP server to the primary flash area of a ProCurve Routing Switch 9300m. What is the effect of this command?
A.The switch will restart using the system image that was specified in the last boot system command.
B.The switch will restart but will not boot from a system image in flash memory.
C.The CLI will return an error saying the command must specify a system image for booting.
D.The switch will restart using the new image.
Correct:A
18.Click the Exhibit button. In this interface, which step is necessary to create VLAN 128 in the running configuration of the ProCurve Routing Switch 9300m?
A.click Add
B.click Save
C.click Modify
D.click Select Port Members
Correct:A
19.An administrator enters enable super-user-password password at the CLI of a ProCurve Routing Switch 9300m. How does this command affect the privileges available in the User EXEC access level?
A.User EXEC privileges are greatly reduced.
B.User EXEC privileges are not affected by this command.
C.User EXEC privileges are identical to Privileged EXEC privileges.
D.User EXEC privileges are eliminated until the administrator configures a read-only user.
Correct:A
20.What is the default privilege level when a new local user is created using the username command at the CLI of a ProCurve Routing Switch 9300m?
A.read-only
B.port-config
C.super-user
D.Privileged EXEC
Correct:C
21.Which function is available from the Boot Monitor?
A.boot with a named configuration file
B.boot system from the secondary flash area
C.Telnet to another router
D.erase the startup configuration
Correct:B
22.An administrator enters show ip interface ve 77 at the CLI of a ProCurve Routing Switch 9300m. The output of the command shows that the port state is OWN.?What does this indicate?
A.IP routing has not been enabled for ve 77.
B.The VLAN associated with ve 77 has no active ports.
C.No VLAN is associated with ve 77.
D.No IP address has been configured for ve 77.
Correct:B
23.What is a difference between steps used to create VLANs on the ProCurve Routing Switch 9300m and the ProCurve Switch 5300xl?
A.The 9300m allows the VLAN to be created and ports added as members in a single command statement. The 5300xl requires separate commands for these configuration items.
B.The 9300m allows the VLAN to be created and an IP address configured for the VLAN with a single command statement. The 5300xl requires separate commands for these configuration items.
C.The 5300xl requires you to create a virtual interface before adding an IP address. The 9300m enables you to complete both of these configuration items in a single step.
D.The 5300xl allows the VLAN to be created and ports added as members with a single command statement. The 9300m requires separate commands for these configuration items.
Correct:D
24.Port e 1/1 on a ProCurve Routing Switch 9300m is a tagged member of VLAN 30 only. What is the effect of the following command? 9300m(config-vlan-30)#no tag e1/1
A.Port 1/1 becomes an untagged member of VLAN 30.
B.Port 1/1 becomes a tagged member of the Default VLAN.
C.The CLI returns an error saying you cannot create orphan ports.
D.Port 1/1 becomes an untagged member of the Default VLAN.
Correct:D
25.When is it necessary to enable dual mode for a port on the ProCurve Routing Switch 9300m?
A.when the port must support more than one IP address
B.when the port must carry tagged and untagged traffic
C.when the port must support a physical interface and a virtual interface
D.when the port must be a tagged member of more than one VLAN
Correct:B
26.Click the Exhibit button. On Router2, which default route statement will enable hosts on VLAN 30 to connect to the Internet?
A.ip route 0.0.0.0/0 10.1.1.2
B.ip route 0.0.0.0/0 10.1.30.1
C.ip route 0.0.0.0/0 10.1.100.2
D.ip route 0.0.0.0/0 10.1.100.1
Correct:D
27.Click the Task button. Arrange the steps to associate an IP address with an existing VLAN on a ProCurve Routing Switch 9300m.

Correct:
Green choice6---->Yellow Choice1
Green choice2---->Yellow Choice2
Green choice1---->Yellow Choice4
Green choice3---->Yellow Choice5
28.How does the following command affect VLAN support on the ProCurve Routing Switch 9300m? 9300m(config-if-e1000-1/1)#ip address 10.1.65.1/24
A.Port 1/1 is removed from the Default VLAN.
B.No user VLANs can be configured on the switch.
C.Port 1/1 cannot be added to any user VLANs.
D.Only protocol-based VLANs can be configured on the switch.
Correct:C
29.An administrator enters the following command at the CLI of a ProCurve Routing Switch 9300m: 9300m(config)#router rip What further step is required to enable RIP on the router?
A.Enable RIP in VLAN configuration context.
B.Enable RIP in interface configuration context.
C.Enable RIP in network configuration context.
D.Enable RIP in IP configuration context.
Correct:B
30.Click the Task button. Arrange the steps necessary to enable RIP on the ProCurve Switch 5300xl.

Correct:
Green choice4---->Yellow Choice1
Green choice1---->Yellow Choice2
Green choice2---->Yellow Choice3
Green choice3---->Yellow Choice4

KillTest IT認證題庫網專業提供HP ASE HP0-790最新題庫下載，完全覆蓋HP0-790考試原題。HP0-790:HP ASE HP0-790 Questions and Answers,HP ProCurve Routing Switch Essentials v5.21

全部考試

640-802,000-514,310-065

密碼：

注冊賬號