• 首頁
• 考題分類
• 如何購買

ProCurve Mobility

HP MASTERASE HP0-752考試題庫由KillTest認證題庫網資深IT認證講師和HP MASTERASE產品專家結合PROMETRIC或VUE的真實HP0-752考試環境最新原題傾心打造。

題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對HP MASTERASE HP0-752(ProCurve Mobility)考試原題完整覆蓋。HP0-752題庫助您輕鬆通過認證考試，一次不過全額退款。

HP MASTERASE HP0-752(ProCurve Mobility)考題由我們的資深IT認證講師和HP MASTERASE產品專家精心打造，包括了當前最新的真實HP0-752考題，全部附有正確答案。

所有購買KillTest HP0-752 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過HP MASTERASE HP0-752考試。

1、本題庫源自合作考試中心的真實考試原題，截屏后由我們的專業團隊匯總整理，再經過合作培訓中心資深IT認證講師對考題校對，保證了認證考試題庫的專業品質，題庫試題正確率100%，對HP0-752認證考試考題覆蓋率96％以上。您只需在參加HP MASTERASE HP0-752認證前整體學習下本題庫，必定可以輕鬆完成考試，一次通過認證。

2、KillTest 實行“一次不過全額退款”承諾。如果您購買了我們的《HP0-752 Exam》考題，只要不是首次通過，憑蓋有PROMETRIC或VUE考試中心鋼印的考試成績單，我們將退還您購買HP0-752題庫的全部費用，絕對保證您的利益不受到任何的損失。(全額退款詳情)

3、作為亞太地區最專業的IT認證試題題庫供應商，我們提供完善的售後服務，我們對所有購買題庫的客戶提供跟蹤服務，在您購買考題后的60天內，享受免費升級考題服務，如果在這期間，認證考試中心對HP0-752考題做出修改或變題，我們會在第一時間更新相關題庫，并免費提供給您更新下載。

ProCurve Mobility(HP0-752 Exam)屬於HP MASTERASE認證考試中的一門，如果需要取得HP MASTERASE證書，您可能還需要參加其他相關考試，詳情可訪問HP MASTERASE認證專題，在那裡，你將看到所有HP MASTERASE認證相關考試科目。

HP0-752:下载HP0-752考试题库演示部分（PDF格式）

HP0-752题库部分演示（DEMO）

1.When does supplemental authentication occur?
A.after both the open-key 802.11 authentication and the 802.11 association are completed successfully
B.after both the shared-key 802.11 authentication and the 802.11 association are completed successfully
C.after the open-key 802.11 authentication is completed successfully but before the 802.11 association process begins
D.after the shared-key 802.11 authentication is completed successfully but before the 802.11 association process begins
Correct:A
2.Which statement describes a closed system?
A.In a closed system, the wireless network name is encrypted in the 802.11 header.
B.In a closed system, the wireless network name cannot be detected in any 802.11 frames.
C.In a closed system, the wireless network name is not advertised in the 802.11 beacon frame.
D.In a closed system, the wireless network name is not included in the header of any 802.11 frames.
Correct:C
3.Which statements describe 802.11a? (Select two.)
A.It interferes with 802.11b/g.
B.It requires support for 802.11h in Europe.
C.It experiences interference from microwaves.
D.It has higher data rates than 802.11b.
E.It was the first adopted and most widely used standard.
Correct:B D
4.You configure two access points (Aps) to support a single wireless LAN (WLAN). One station associates with one AP, and one station associates with the other AP. What do the two stations have in common?
A.wireless cell
B.service set identifier (SSID)
C.basic service set identifier (BSSID)
D.independent basic service set identifier (IBSSID)
Correct:B
5.In which mode does the ProCurve Access Point (AP) 420 operate?
A.mixed-cell mode
B.in-cell relay mode
C.peer-to-peer mode
D.infrastructure mode
Correct:D
6.ProCurve Mobility Infrastructure Solutions help you meet the challenges posed by a wireless network (as compared to a traditional wired network). What is one of these challenges?
A.802.11 standards do not provide any guidelines for Layer 2 roaming.
B.Studies have found that users tend to be less productive when they have mobile access to a network.
C.Multiple users connect to the network through the same access point (AP), but access must be customized for each user.
D.802.11 standards do not provide any encryption, so you must create virtual private network (VPN) tunnels to each end station.
Correct:C
7.What is one reason to choose ProCurve's Wireless LAN System over its standalone AP solution?
A.Your network requires many wireless devices that are managed from a central location.
B.You need your wireless network solution to provide RADIUS services.
C.Your network requires Layer 3 roaming and advanced authentication options.
D.You want to manage your wireless network using ProCurve Manager (PCM) Plus.
Correct:A
8.When configuring a Wireless LAN (WLAN) on the ProCurve Wireless Edge Services xl Module, you can use Normal mode or Advanced mode. Why would you use Advanced mode, rather than Normal mode?
A.You want to configure 16 WLANs.
B.You want to customize the transmit power for only one RP.
C.You want one WLAN to be supported on only one of the RPs.
D.You want the adopted Radio Ports (RPs) to beacon a WLAN that has an index number of 4.
Correct:C
9.Which ProCurve Wireless LAN System feature protects your company if a Radio Port (RP) fails?
A.redundancy group
B.network self-healing
C.interference avoidance
D.radio frequency (RF) patching
Correct:B
10.Which statement describes a ProCurve Radio Port (RP)?
A.If you change an RP's configuration, you must always reload the RP before that configuration can take effect.
B.When the RP receives a wireless frame, it removes the 802.11 header and replaces it with an Ethernet header.
C.When the RP receives wireless traffic from stations, it encapsulates that traffic before sending it to the Wireless Edge Services xl Module.
D.After receiving a configuration from the Wireless Edge Services xl Module, the RP saves that configuration to its internal flash.
Correct:C
11.Which type of message does a Radio Port (RP) transmit so that a ProCurve Wireless Edge Services xl Module can detect it on the network?
A.Inter-Access Point Protocol (IAPP)
B.Address Resolution Protocol (ARP)
C.Link Layer Discovery Protocol (LLDP)
D.Internet Control Message Protocol (ICMP)
Correct:C
12.A company installs the ProCurve Wireless LAN System and requires two Radio Ports (RPs) for the cafeteria. One RP must be installed outside and one RP must be installed inside. Both RPs must support 802.11a, b, and g. Which RPs should the company purchase?
A.two RP 210s
B.one RP 220 and one RP 230
C.one RP 220 and one RP 210
D.one RP 230 and one RP 210
Correct:B
13.You connect a Radio Port (RP) to a ProCurve Switch 2600-PWR Series, which is connected to a wireless services-enabled switch. On the 2600-PWR Switch, port 5 connects to the RP, and port 1 connects to the wireless services-enabled switch. The 2600-PWR Switch is sending traffic from other VLANs to the wireless services-enabled switch. Which commands must you enter on the 2600-PWR Switch to enable the Wireless Module to detect the RP? (Select two.)
A.vlan 2100 tagged 1
B.vlan 2100 tagged 5
C.vlan 2100 untagged 5
D.vlan 2100 untagged 1
E.autoprovisioning enable
Correct:A C
14.Which virtual LAN (VLAN) or VLANs are automatically created on the wireless services-enabled switch if auto-provisioning is enabled?
A.Radio Port VLAN
B.the VLAN assigned to WLAN 1
C.any dynamic VLAN assigned to wireless users
D.any VLAN created on the Wireless Edge Services xl Module
Correct:A
15.Click the Exhibit button. Which channel should you select for the cell with the question mark?

A.4
B.6
C.8
D.10
E.12
Correct:B
16.Which steps should you take during a site survey to test the coverage provided by access points (Aps) or Radio Ports (RPs)? (Select two.)
A.Analyze the signal to noise ratio (SNR) at different hours of operation.
B.Set up wireless bridges between the Aps to ensure that they can reach each other.
C.Configure encryption keys and attempt to crack them using readily-available software.
D.Look for areas of overlap between nearby cells and set overlapping cells to different channels.
E.Compare the coverage provided by an RP 210 and an RP 230, and decide between the products.
Correct:A D
17.For which scenario might you recommend the use of 802.11 pure-g mode?
A.a public wireless network for customers and contractors
B.an environment with potential interference from military radar
C.a controlled environment with the latest high-tech equipment
D.a wireless network that carries sensitive financial information
Correct:C
18.Ten stations are associated to a ProCurve Access Point (AP) 530 radio, and all are downloading data. Each station is operating at the 54 Mbps data rate. What average throughput can any individual user most realistically expect?
A.2 Mbps
B.6 Mbps
C.27 Mbps
D.54 Mbps
Correct:A
19.Click the Exhibit button. The ProCurve Radio Port (RP) shown in the exhibit has not been adopted by the Wireless Edge Services xl Module. What could be the reason?

A.The Wireless Edge Services xl Module runs rogue AP detection.
B.The switch port that connects to the RP enforces 802.1X authentication.
C.The switch port that connects to the RP should be tagged for VLAN 2100.
D.The Wireless Module's internal uplink port should be untagged for VLAN 2100.
Correct:B
20.Your company is setting up a wireless network using a ProCurve Access Point (AP) 420. Users throughout the building complain that they cannot see the name for your wireless network in their wireless client utilities. You ping the AP 420 and receive a response. What might be the problem? (Select two.)
A.The AP's country code has not been set.
B.The AP has failed to boot.
C.The AP uses a different security option than the users' stations do.
D.The AP operates in open system, but users' stations operate in closed system.
E.The AP's radio has been dedicated to AP detection.
Correct:A E
21.Click the Exhibit button. You are helping a user who is having trouble connecting to a wireless LAN (WLAN) supported by a ProCurve Access Point (AP) 530. You look in the AP 530's event log and see that the status of the user's station is as shown in the exhibit. What could be the problem?

A.The station has failed MAC authentication.
B.The user has entered the wrong preshared key (or password).
C.The station does not support the data rates required in the cell.
D.The station uses open-key rather than shared-key authentication.
Correct:B
22.Currently, your ProCurve AP 530 supports both 802.11b and 802.11g stations on both of its radios. However, users have been reporting slow connections. What is one way that you could attempt to raise throughput for 802.11g stations?
A.Lower the RTS/CTS threshold on both radios.
B.Disable support for the long preamble on both radios.
C.Enable 802.11b on radio 1, and 802.11 g-only on radio 2.
D.Disable Protection in the advanced radio settings for one radio.
Correct:C
23.Your wireless LAN (WLAN) enforces static Wired Equivalent Privacy (WEP) security. A user complains that he has entered the correct WEP key but cannot connect to the WLAN. You enter the correct WEP key on his station and experience the same problem. Other users can connect. What might be the problem?
A.The user's wireless client is configured with the wrong key index.
B.The user's wireless client is using the wrong Initialization Vector (IV).
C.The user's account on the directory server does not allow dial-in access.
D.Your user's wireless client does not support that same authentication method that the RADIUS server supports.
Correct:A
24.Click the Exhibit button. You are helping a user who cannot connect to your company's wireless network (shown in the exhibit). You see this message in the ProCurve Access Point (AP) 530's event log: "Authentication server rejected EAP authentication." (EAP stands for Extensible Authentication Protocol.) What could be the problem?

A.The AP 530 has been configured for the wrong EAP method.
B.The AP 530's key index does not match the key index on the user's station.
C.The user's station is using an EAP method not supported by the RADIUS server.
D.The user has entered the incorrect Wi-Fi Protected Access (WPA) preshared key.
Correct:C
25.What should you do if you forget your manager password to the Wireless Edge Services xl Module's Web browser interface?
A.Access your operator account and change the manager password.
B.Press the Clear button on the front of the module to clear the password.
C.Press the Reset button on the front of the module to reset to the factory settings.
D.Return the module to ProCurve Networking, which will reset the module to factory settings.
E.Access the module's CLI through the wireless services-enabled switch and change the password.
Correct:E
26.Click the Exhibit button. These are the data rate sets configured on your ProCurve Access Point (AP) 530's radio. Which statements concerning capacity in the cell are true? (Select two.)

A.At any given moment, one station can transmit at up to 54 Mbps.
B.Only one station at a time can transmit at 54 Mbps, but all can transmit at 6 Mbps.
C.Each station must be able to transmit at no less than 6 Mbps in order to join the cell.
D.The theoretical bandwidth for the cell is 54 Mbps, but overhead reduces it to 6 Mbps.
E.Every station is allowed up to 6 Mbps bandwidth, and the cell can support 9 stations.
Correct:A C
27.As the number of stations associated with your Access Point's (AP's) radio increases, what happens to the capacity?
A.Total capacity increases, but overhead decreases effective capacity.
B.Total capacity stays the same, but per-station bandwidth decreases.
C.Total capacity decreases due to increased overhead and interference.
D.Total capacity stays the same, as does per-station bandwidth, until to the station limit is reached.
Correct:B
28.Which type of signal interference could occur if metal filing cabinets surrounded a wireless station and its access point (AP)?
A.dropout
B.mirroring
C.multipath
D.shadowing
Correct:C
29.What is true of an omnidirectional antenna?
A.It radiates the signal in all directions equally, both vertically and horizontally.
B.It radiates the signal in all directions equally, vertically but not horizontally.
C.It radiates the signal in all directions equally, horizontally but not vertically.
D.It radiates the signal in all directions equally, vertically and horizontally, until the 3 dB line.
Correct:C
30.You are installing an AP in the middle of an office that includes a great deal of furniture and some reflective glass cases. Which antenna type should you choose?
A.diversity directional
B.non-diversity directional
C.diversity omnidirectional
D.non-diversity omnidirectional
Correct:C

KillTest IT認證題庫網專業提供HP MASTERASE HP0-752最新題庫下載，完全覆蓋HP0-752考試原題。HP0-752:HP MASTERASE HP0-752 Questions and Answers,ProCurve Mobility

全部考試

640-802,000-514,310-065

密碼：

注冊賬號